CARPENTRY, SHEETROCK AND CEILING REPAIRS

Sheetrock repairs done right are what separates a paint job that looks professional from one that just looks painted. At Southern Perfection Painting, we handle the full prep — patching holes, skim-coating damaged drywall, fixing rotten trim, and restoring ceilings — before a single brush touches your walls. That sequence matters. Paint won't hide a bad surface; it'll highlight every flaw.

Owner Sabrina Williams built this business on one principle: surface prep is the job. The painting is the reward. Our crews are W-2 employees, covered by Workman's Compensation insurance — important on any job involving ladders or lifts — and every project gets a free, itemized estimate with a 48-hour response. Call 770-985-3075 to schedule yours.

Sheetrock & Drywall Repair: What We Actually Fix

We patch and skim-coat holes, cracks, water-damaged sections, nail pops, and tape seams on interior drywall and sheetrock. We also work as a sheetrock subcontractor for general contractors on commercial jobs — finishing and painting after other trades are done. What we don't do: metal-stud framing, structural work, load-bearing modifications, or taping-only crew assignments on union sites. We're a painting contractor, not a general contractor, and we're upfront about that distinction. For most homeowners and commercial clients, the scope we handle covers everything needed to get walls and ceilings ready for a flawless finish coat using Sherwin-Williams and Benjamin Moore products.

Popcorn Ceiling Removal & Smooth Ceiling Restoration

Removing a popcorn ceiling — sometimes called a stucco ceiling — is dusty, time-consuming work that most people underestimate. We wet the texture, scrape it down in sections, then skim-coat the substrate smooth before priming and painting. Homes built before 1978 require testing for asbestos before any removal of stucco ceiling material — we'll flag that before scoping the job. Once the ceiling is smooth, we apply a fresh coat of ceiling white; spot-painting an aged ceiling never matches, so we always recommend painting the full plane. The result looks like a completely different room.

Carpentry Prep: Trim, Fascia & Crown Molding

Rotten trim, failing fascia, damaged soffits — these need to be addressed before exterior paint goes on, not after. We replace deteriorated wood components as prep work that precedes the coating system, which is the correct sequence. Inside, we install and repair crown molding and ceiling moulding, fill gaps at mitered joints, and sand everything flush before priming. Because this work often involves ladders and lift equipment, our Workman's Compensation coverage protects everyone on site. We won't paint over soft wood hoping it holds — that's how you end up repainting the same surface in two years.

Can SPPI Touch Up a Single Section of Ceiling?

Honestly, no — and any contractor who tells you otherwise is setting you up for disappointment. Ceilings yellow and shift in tone as they age from smoke, cooking fumes, and UV exposure. Spot-patching reads as a lighter patch against a warmer background, every single time. The right call is a full ceiling repaint. We offer free estimates so you know exactly what the scope and process involve before committing to anything. Contact us and we'll walk you through what your specific ceiling needs.

Commercial Sheetrock Subcontracting

General contractors in the metro Atlanta area use SPPI as a reliable sheetrock finishing and painting subcontractor on commercial builds and renovations. We bring $1M general liability coverage, daily foreman supervision, and a 1-year commercial warranty on completed interior and exterior work. Scheduling after-hours work is project-specific and must be quoted — we don't advertise it as standard. If you're a GC looking for a dependable finishing sub, call 770-985-3075 and ask for a commercial scope review.

Frequently Asked Questions

What does sheetrock repair include?

Sheetrock repair covers patching holes and cracks, skim-coating water-damaged sections, fixing nail pops, and smoothing tape seams. We assess the surface condition first, then recommend whether a patch, a skim coat, or a full panel replacement is the right fix. Every repair is primed and finished to match the surrounding wall before paint goes on.

How do I remove a popcorn ceiling — can I do it myself?

Technically yes, but homes built before 1978 may contain asbestos in the ceiling texture — you need a certified test before disturbing the material. The process involves wetting sections of texture, scraping carefully, then skim-coating the raw drywall smooth. Most DIYers underestimate the skim-coat step and end up with a lumpy surface that looks worse than the popcorn did. If you want it done flat and clean, professional removal and a fresh paint coat is the practical answer.

Is it worth paying a painter for ceiling and drywall repairs?

If the goal is a smooth, lasting result — yes. The material cost of sheetrock compound and primer is low; the skill is in the finishing. Poorly feathered patches and uneven skim coats show clearly under raking light. Combining the repair and paint scope in one project also means fewer site visits and one warranty covering the whole job.

Do you remove stucco ceilings or just paint over them?

We do both, depending on what the customer wants. Removing a stucco ceiling texture gives you a smooth modern look, but it's a larger project involving scraping, skim-coating, and a full repaint. Painting over existing popcorn texture is faster, but it adds weight to the texture and slightly softens the profile. We'll tell you which approach makes sense for your specific ceiling condition — not just whichever one is easier for us.

Can you install crown molding before painting?

Yes. We install and repair crown molding and ceiling moulding as part of our carpentry prep scope. Once crown molding is set, we fill nail holes, caulk all joints, sand smooth, prime, and paint in sequence. Doing it this way — carpentry first, then paint — produces a cleaner result than trying to cut in around existing molding that wasn't prepped properly.

How do I find a good painter for ceiling and sheetrock work?

Ask for Workman's Compensation documentation before anyone gets on a ladder in your home — that's the clearest indicator of a legitimate operation. Get an itemized written estimate that specifies the repair scope, the coating products, and the number of coats. A contractor who can't tell you exactly what paint they'll use or won't put the warranty in writing isn't one you want working on your ceilings.

Is it normal for a painter to ask for money up front?

A small deposit on large commercial or multi-week residential projects is standard practice. Asking for full payment before work starts is not. At SPPI, we'll outline payment terms in your written estimate so there are no surprises. If a contractor demands full payment up front before stepping on site, walk away.

Do you offer free estimates for sheetrock and ceiling repairs?

Yes — always. We visit your property, assess every surface, and deliver a free itemized estimate within 48 hours. The estimate lists the repair scope, the specific Sherwin-Williams or Benjamin Moore products we'll use, prep steps, and the project timeline. No vague allowances, no hidden line items.

What paint do you use on repaired ceilings?

We use Sherwin-Williams and Benjamin Moore ceiling products as standard — flat or matte sheens that minimize texture variation and hide minor surface imperfections. After any sheetrock repair or popcorn ceiling removal, the repaired section gets a dedicated primer coat before the finish coat goes on. Skipping primer on fresh compound is one of the most common shortcuts that leads to visible flash spots.

What is a painter's role in construction repair projects?

In repair and renovation projects, a painting contractor like SPPI handles surface prep, carpentry patching, sheetrock finishing, priming, and final coatings. On commercial jobs we also subcontract directly to general contractors for sheetrock finishing and painting scopes. The painting contractor is typically the last trade on site — which means every flaw left by previous trades becomes visible in the final coat if prep wasn't done correctly.

Call 770-985-3075 or request your free itemized estimate online — we respond within 48 hours. Sheetrock repairs, popcorn ceiling removal, carpentry prep, and more across metro Atlanta.